Welded wire reinforcement is adopts cold-rolled high tensile steel wire.It is welded by an automatic welding machine by "electric resistance welding method",The weld shear strength at the intersection of steel wires provides mechanical anchoring of the welded wire reinforcement,Because of the higher yield strength of low-carbon steel wire, it can effectively reduce the used amount compared to rebar.Because the Welded wire reinforcement is a sheet type, the size is produced according to the specifications, it is easy to construct, easy to handle, and when bearing the stress can evenly distribute the stress, reducing the stress concentration.
The Welded wire reinforcement can be easily installed and can be free of manual binding. The Welded wire reinforcement has a large construction area per labor unit, which can greatly shorten the working hours by 50~75%.
Prevent cracking:The rebar is not bound exactly executed, which causes the wire to fall off. The Welded wire reinforcement can prevent loosening due to the high welding strength of the welding point and evenly distribute the binding force in the vertical and horizontal directions, avoiding stress concentration and effectively preventing cracks.
Prevent cracking:The precisely Welded wire reinforcement will not be shifted or even loosened due to stepping during the construction period, avoiding the mistakes of missing or wrong binding due to manual binding, and can improve its construction quality compared to rebar.
Item | Common production specifications |
Longitudinal wire diameter | 2.8 - 5 mm |
Transverse wire diameter | 2.8 - 5 mm |
Longitudinal spacing | 50,75,100,150,200 mm |
Transverse spacing | 50,75,100,150,200 mm |
Width | 2000mm |
Length | 3000mm |
If you have any special requirements, please feel free to call us for customization.
National Standards of the Republic of China(Taiwan) (CNS)): CNS 6919 Welded steel wire mesh and steel fabric CNS 1468 Low Carbon Steel Wire
American Society for Testing and Materials (ASTM):ASTM A1064 / A1064M - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
Japanese Industrial Standard (JIS) JIS G 3551 Welded steel wire and bar fabrics